How to choose the metal surface oil cleaning agent


Release time:

2020-06-29

SelectOil stain cleaning agent for metal surfaceYou can make a decision based on the following aspects:

1, according to the cleaning of the metal surface material to make a choice
The cleaning methods of mechanical parts and large metal equipment are different, and the solvents used are also different. In general, the use of solvent-based metal cleaning parts, cleaning large metal equipment using water-based metal cleaning agent.
 
2, the choice of water-based metal surface cleaning agent or solvent metal surface cleaning agent
If the cleaning of the metal workpiece requires fast volatilization, and has the requirement of rust prevention, the solvent type cleaning agent can be considered. If you want to save costs, you can consider the use of water-based cleaning agents, after dilution to start cleaning.
 
3. Cleaning process adopted
If the use of ultrasonic or spray cleaning, the general use of low-foam type of ultrasonic cleaning agent; electrolytic cleaning with a special electrolytic cleaning agent; artificial scrub or steam cleaning is the use of solvent-based cleaning agent.
 
4, the use of metal surface oil cleaning agent must be rust-proof
Except for some equipment and precision parts that need to work for a long time, most of the other equipment is not necessary for rust prevention. Therefore, most enterprises choose water-based metal cleaning agent with low comprehensive cleaning cost and no anti-rust function.
 
5. Combination of solvent-based metal cleaning agent and production process
If the anti-rust effect is not ideal, you can consider adding a cleaning tank and adding anti-rust agent in the tank, the metal workpiece in the tank over again, you can achieve the desired anti-rust effect, anti-rust agent consumption is very small, will not increase too much cost.












risi bo professional oil cleaning agent manufacturer!