Suggested scheme for treatment of industrial cleaning agent waste liquid

Release time:


Industrial cleaning agents are faced with a waste liquid treatment process after use, so how to deal with industrial cleaning agent waste liquid is environmentally friendly and low cost? First of all, it is recommended to use the industrial cleaning agent of Resbo Chemical, which is environmentally friendly and meets the emission requirements. In addition, there are some treatment methods can also deal with industrial cleaning agent waste.
Suggested scheme for treatment of industrial cleaning agent waste liquid

One. Static sedimentation to remove solid impurities
The cleaning agent is collected in a special sedimentation tank and left standing for one day and one night. After the solid impurities in the liquid sink to the bottom and all kinds of oil stains float, the next treatment is carried out.

II. oil slick removal
You can use the oil separation method to isolate the floating oil, you can also use oil-absorbing paper or sponge to absorb the surface oil, or use the water method to flow out of the upper layer. After oil removal, the waste liquid is poured into another tank.

Three. Neutralizing liquid
Using the principle of acid-base neutralization, caustic soda or lime is added for acid-base reaction. First, take a sample for PH test, use acid-base titration method to test the amount of medicine to be added, then put less than neutralization reaction acid-base medicine into the pool, after a period of reaction, test the PH value of the liquid in the pool, and then add the corresponding amount of medicine. Until the PH value of the test liquid is between 6 and 9, it can be settled still, the supernatant is separated to another pool, and the lower sediment is landfilled for treatment.

Four. Decrease the COD value in the liquid
This supernatant may not be able to meet the discharge requirements, because the liquid may still contain oil and organic matter. To further treat the organic matter, we can add strong oxidants, such as hydrogen peroxide or bleaching powder, to effectively decompose and oxidize the organic matter, so that the COD value of the liquid can meet or approach the discharge standards required by various places.

Five. Treatment of Small Amount of Suspended Substances
We have already precipitated large solid particulate matter in the first step of the sedimentation tank, and only a small amount of suspended matter of small molecules is left here. This part of matter needs to be removed by adding flocculants such as polyvinylpyridine, polyacrylic acid, polyacrylamide, etc. to adsorb suspended particles to gradually increase and precipitate.

VI. Test water quality
When the above steps are completed, it is believed that the various indicators in the liquid can return to the normal emission indicators, and a small amount of water quality can be tested accordingly. If it is found that there is a deficiency in a certain link, it can be treated accordingly.
Note: For detailed wastewater treatment process, please consult a professional industrial cleaning agent wastewater treatment company