How to choose oil stain cleaning agent for metal parts?
Long-term use of mechanical parts and equipment will inevitably make the parts stained with oil and stains. Oil on metal parts is generally a mixture of grease, dust, rust, etc., which is usually difficult to be diluted and dissolved by water. In order to make the equipment can run efficiently and ensure the processing technology of mechanical parts, it is necessary to use professional metal oil cleaning agent, so how can it be cleaned efficiently, safely and economically?
1, according to the cleaning of the metal surface material to make a choice:
The cleaning methods of mechanical parts and large metal equipment are different, and the solvents used are also different. In general, the use of solvent-based metal cleaning parts, cleaning large metal equipment using water-based metal cleaning agent.
2. How to choose water-based metal surface cleaning agent and solvent metal surface cleaning agent:
If the cleaning of the metal workpiece requires fast volatilization, and has the requirement of rust prevention, the solvent type cleaning agent can be considered. If you want to save costs, you can consider the use of water-based cleaning agents, after dilution to start cleaning.
3. Cleaning process adopted:
If the use of ultrasonic or spray cleaning, the general use of low-foam type of ultrasonic cleaning agent; electrolytic cleaning with a special electrolytic cleaning agent; artificial scrub or steam cleaning is the use of solvent-based cleaning agent.
4, the use of metal surface oil cleaning agent must be rust:
Except for some equipment and precision parts that need to work for a long time, most of the other equipment is not necessary for rust prevention. Therefore, most enterprises choose water-based metal cleaning agent with low comprehensive cleaning cost and no anti-rust function.
5. Combination of solvent-based metal cleaning agent and production process:
If the anti-rust effect is not ideal, you can consider adding a cleaning tank and adding anti-rust agent in the tank, the metal workpiece in the tank over again, you can achieve the desired anti-rust effect, anti-rust agent consumption is very small, will not increase too much cost.
With the rapid development of industrialization, users have higher and higher requirements for metal parts. The processing of many metal parts is becoming more and more mechanized, and there are high requirements for product maintenance. How to clean the dirt on metal parts is the most concerned problem of Ruibao cleaning agent manufacturers, and it is also the oil removal treatment that must be done before the metal is processed for subsequent processing, so as to avoid the influence of oil pollution on subsequent welding, painting and other processes.
Metal oil cleaning agent recommended