Bearing cleaning two methods and cleaning agents to reveal the secret

Release time:


Frequently used bearings, if not regularly cleaned, the resulting oil will reduce its service life. Many people do not know how to clean the bearing, choose the right oneIndustrial cleaning agentIt is very important, how to choose the recommended method for today's Ruisibo editor.Industrial cleaning agentMethods to share with everyone.

Bearings with soft dry oil or anti-rust paste shall be immersed in hot engine oil at 100 ℃ ~ 200 ℃, clamp the bearing with pliers, and clean the oil on the bearing with a brush. Soft dry oil or antirust paste is heated to 100 ℃ ~ 200 ℃ will melt, it is easy to wash out from the gap of the bearing. Sometimes it is only necessary to shake the bearing several times in the oil. Oil will also flow away from the gap. When cleaning the radial spherical bearing of the bearing, the ball, bead frame and inner ring should be laterally turned out from the outer ring and then immersed in hot oil. When cleaning the short cylindrical roller bearing, the roller, bead frame, inner ring and outer ring should also be separated. During hot oil cleaning, the temperature of the oil should not exceed 20°C.
(1) surface cleaning: cleaning must be based on the nature of the surface of the rust and the conditions at the time, select the appropriate method. Generally used solvent cleaning method, chemical treatment cleaning method and mechanical cleaning method.
(2) dry clean surface can be used after dry filtered compressed air blow dry, or with 120~170 ℃ dryer drying, also can use clean gauze dry.
Ruibao oil stain cleaning agentGQ-100 environmental protection mechanical parts cleaning agentSuitable for bearing cleaning agent, the main features of this product:
☆ This product is a non-ODS solvent-based cleaning agent with strong oil-dissolving effect. It can thoroughly remove the oil stains on the bearings, gears, transmission chains, pistons and other parts with heavy grease stains, as well as degreasing before assembly of mechanical equipment and sealing and cleaning before storage of products.
ruibao oil cleaning agent performance:
☆ strong cleaning ability, can quickly remove the surface of mechanical parts of dust, iron powder, soil, oil and other dirt.
☆ Volatilization speed is moderate, leaving no residue after volatilization.
☆ Safe and reliable, no corrosion and does not affect the various properties of mechanical parts. No ignition hazard of olefin and gasoline.
☆ Easy to use, the use of special spray gun, the mechanical parts do not need to be completely disassembled can also be cleaned.
Resbo'sIndustrial cleaning agentEnvironmental protection and safety, regular manufacturers, full service!
Resbo-Industrial cleaning agent manufacturers