High-end cleaning agent manufacturers tell you the difference between hydrocarbon cleaning agent and traditional cleaning agent?


Release time:

2021-09-03

Hydrocarbon cleaning agentIs an organic solvent cleaning agent. What is a solvent cleaner?

The organic solvent cleaning agent refers to an organic solvent containing no water in the composition, and the hydrocarbon cleaning agent is a cleaning agent composed only of carbon and hydrogen as a main body. HydrocarbonCleaning agentIt has good environmental characteristics and cleaning ability. Under the condition that the state gradually restricts and finally completely eliminates ODS (ozone destroying substances) cleaning agents, hydrocarbon cleaning agents are the best organic solvents to replace and eliminate ODS at present. Hydrocarbon cleaning technology combining hydrocarbon cleaning agent with vacuum cleaning dryer has become the mainstream of cleaning industry.

We Jiangxi Ruisibo New Materials Co., Ltd. in response to the national call, the production of environmental protectionHigh-end cleaning agentAnd hydrocarbon cleaning agent, of which RSB-809 environmental protection solvent cleaning agent belongs to hydrocarbon cleaning agent, which is widely used for precision cleaning of oil stains on surfaces of various mechanical processing hardware parts, mobile phones, computers and other precision stamping parts, household appliances (such as air conditioning motor rotors) and mechanical equipment parts maintenance, plastic products and other oil stains.

Environmentally friendly hydrocarbon cleaning agent


1. Good cleaning performance: Hydrocarbon cleaning agent is a non-polar petroleum fraction, which is used together with most stamping oil, pickling oil and machining oil. According to the principle of similar compatibility, the effect of hydrocarbon cleaning agent in cleaning mineral oil is better than that of halogenated hydrocarbon and water-based cleaning agent.
The evaporation loss is small: the boiling point of hydrocarbon cleaning agent is generally above 160 ℃. During use and storage, the air loss of 40~80 ℃ is much smaller than that of halogenated hydrocarbons, and the sealing requirements of packaging and equipment are very low.
3. Non-toxic: After toxicology tests, the inhalation toxicity, oral toxicity and skin contact toxicity of hydrocarbon cleaning agents are low toxicity, and are not carcinogenic substances. Halocarbons are safer for cleaning operators than halocarbons.
4. Good material compatibility: Hydrocarbon cleaning agent is a non-polar petroleum fraction with most stamping oil, pickling oil and machining oil. According to the principle of similar compatibility, the effect of hydrocarbon cleaning agent in cleaning mineral oil is better than that of halogenated hydrocarbon and water-based cleaning agent.
5. Completely volatile without residue: hydrocarbon cleaning agent is a very pure refined solvent, which can be completely volatilized without any residue under normal temperature heating.
6. Environmental protection: Hydrocarbon cleaning agents can be naturally degraded, and cleaning waste liquid can be put into coal or burned in oil-fired boilers. Incineration products are mainly carbon dioxide and water, which will not pollute the air. Hydrocarbon cleaning agent does not contain chlorine, the damage coefficient of ozone is zero.
7. Short-term anti-rust function: The workpiece after hydrocarbon cleaning has a certain anti-rust function, and the anti-rust time is greater than or equal to 48H;


Traditional cleaning agent

1. Washable but discharged wastewater: In the case of increasingly stringent environmental protection, the traditionalCleaning agentThere are emission requirements, and professional environmental protection equipment is required for treatment before emission, and the cost is relatively high. Among them, acidic cleaners are harmful to the human body;
2. High energy consumption: with hydrocarbonCleaning agentCompared to the traditionalCleaning agentThe requirements for drying are higher, so the energy consumption is large and the drying time is also high. relatively long;
3. No rust: traditional cleaners can not achieve short-term anti-rust function after cleaning;
4. Low operation rate: traditional cleaners cannot reach the fully automatic operation mode, which belongs to the manual and automatic operation mode, so the operation rate will be relatively low;