Application and requirements of environmental protection industrial cleaning agent for automobile manufacturing industry

With the rapid development of China's automobile industry, the market demand potential is huge. In the production and processing of auto parts, the maintenance and cleaning of metal parts is a very important link. With the development of industrial cleaning technology and the strengthening of people's awareness of environmental protection, people have put forward higher requirements for the use of industrial cleaning agents and cleaning equipment. (I) environmental protection metal parts cleaning agent of the general requirements of the first cleaning equipment and cleaning parts will not be corroded, followed by the cleaning process will not produce residues, including insoluble matter, dirt and is not conducive to the subsequent processing of the coating. Next is the cleaning efficiency to be high,

What is ultrasonic cleaning? How to choose ultrasonic cleaning agent

Hazards and Main Hazards of ODS Cleaning Agents

The main hazards of ODS cleaning agents are mainly manifested in the following aspects: 1. Toxicity: The above solvents have great toxicity except F-113 and 1,1, 1-trichloroethane. Contact through skin, breath or accidental ingestion will cause liver, kidney and blood poisoning, dizziness and vomiting in mild cases, shock and even death in severe cases. The main hazards of ODS cleaning agents are mainly manifested in the following aspects: 1. Toxicity: The above solvents have great toxicity except F-113 and 1,1, 1-trichloroethane. Contact with skin, breath or accidental ingestion will cause liver, kidney and blood poisoning, dizziness and vomiting in mild cases, and rest in severe cases.

Aluminum cleaning agent suitable for ultrasonic cleaning

With the development of aviation, automobile industry and electronics and other machinery manufacturing industry, aluminum alloy metal processing has become very common, but in the manufacturing process of aluminum products, it is inevitable that there will be chip oil, stamping oil residue on the surface, if the surface of aluminum alloy oil removal is not clean, the future processing work is difficult to carry out. Generally speaking, the surface of aluminum alloy products need to remove pollutants including aluminum alloy parts in the stamping, turning, milling and other processing process contamination of various oil, residual polishing paste, hand imprinting, oil seal, surface wax and so on. The main methods of cleaning oil on the surface of aluminum alloy are solvent degreasing, chemical degreasing, electrochemical degreasing and so on.

The original use of metal oil cleaning agent

Oil stains on metal surfaces cannot be decontaminated by cleaning agents. Industrial cleaning agents from regular manufacturers need to be selected, which will not damage the metal surface after cleaning. Then the cleaning agent manufacturer teaches you to choose oil stains on metal surfaces. Decisions can be made according to the following aspects: 1. The cleaning methods of mechanical parts and large metal equipment are different according to the metal surface substances to be cleaned, and the solvents used are also different. In general, the use of solvent-based metal cleaning parts, cleaning large metal equipment using water-based metal cleaning agent. 2, the choice of water-based metal surface cleaning agent or solvent metal surface cleaning agent

Principle of ultrasonic cleaning machine

1. ultrasonic cleaning principle: the high-frequency oscillation signal emitted by the ultrasonic generator is converted into high-frequency mechanical oscillation through the transducer and transmitted to the medium-cleaning solvent, and the ultrasonic wave radiates forward in the cleaning liquid. Make the liquid flow and produce tens of thousands of tiny bubbles. These bubbles form and grow in the negative pressure zone of ultrasonic longitudinal propagation, and close rapidly in the positive pressure zone. In this process, which is called "cavity" effect, the bubble closure can form an instantaneous high pressure of more than 1000 atmospheres, and the instantaneous high pressure is continuously generated, just like a series of small "explosions" constantly impacting the surface of the object, making the object's

Aluminum alloy surface treatment 6 major processes, here is the most complete!

Metal materials are used more and more in the existing products, because metal materials can better reflect product quality and highlight brand value. Among many metal materials, aluminum is the first to be adopted by various manufacturers because of its easy processing, good visual effect and rich surface treatment methods. The surface treatment of aluminum profiles is mainly divided: sandblasting (forming a matte pearl silver surface), polishing (forming a mirror surface), wire drawing (forming a satin-like effect), electroplating (covering a layer of other metals), spraying (covering other non-metallic coatings) The following small series will bring you some relaxing pictures. Follow Ruibao cleaning agent closely and feel one together.

[Metal Cleaning Agent] The main cleaning methods of oil stains on metal surfaces

For metal cleaning agents, many manufacturers do not know how to choose the right cleaning agent. In fact, metal cleaning agent is mainly the cleaning of oil stains on metal surfaces, which has always been a big problem in factory operation. Many factories have interrupted production operations due to improper maintenance of metal equipment, affecting the performance and profits of enterprises. A large part of the reason is that enterprises do not understand the maintenance of metal equipment, do not know how to carry out the correct cleaning and maintenance. So, what are the cleaning methods of oil stains on the metal surface? How to choose the metal cleaning agent? Degreasing cleaning method Cleaning method Features Use tools and media