Cleaning principle of industrial cleaning agent

During industrial cleaning, the dirt is removed by the dissolution of chemical agents on the dirt surface. Its essence is that the industrial cleaning agent dissolves from the dirt surface in contact with it. At the same time, the cleaning agent penetrates into the dirt, reducing the binding force between the dirt particles and reducing the binding force between the dirt and the basic equipment, so that the dirt dissolves or the dirt loosely falls off and is removed. Chemical cleaning operation, its purpose is to remove pollution, improve quality and obtain good processing performance. The development of chemical cleaning technology is closely related to the progress of industrial cleaning agents. The combination of green chemistry and chemical cleaning concepts has recently been proposed, I .e., in reducing or

Have you found the main factors that affect metal rust?

(I) the internal factors of metal corrosion from a thermodynamic point of view, compared with metal and its corrosion products, with high energy, is unstable, there is a tendency of spontaneous conversion to low energy corrosion products, that is, metal corrosion is a natural phenomenon. The vast majority of metals in the industry are multi-component alloys with different metallographic structures, impurities, uneven machining deformation, uneven stress distribution, etc. These physical, chemical and electrochemical inhomogeneities, when the surface encounters Corrosion media or the formation of a water film on the surface, chemical or electrochemical corrosion will inevitably occur. External factors that (II) metal corrosion 1. Phase

Look at today's high-speed rail on the composite material, cleaning agent is the key

The export of China's high-speed rail is of great significance, because this is not only the "going out" of a single industry, but the "going out" of the entire industrial chain ". Although the current market scale of China's high-speed rail is small, once it is recognized by overseas markets, it will reshape the global brand image of made in China and drive the development of upstream and downstream segments of the industrial chain. For high-speed railways, the strength, fatigue performance, lightweight, and manufacturability of the materials used should have a higher level. Therefore, more and more new materials are used in this, and now they are generally in the following aspects: Composite car body Composites have begun to be applied to vehicles, and the amount is increasing.

Frequently asked questions: [volatile antirust oil] can do?

[frequently asked questions: whether the volatile antirust oil can dry] can not be completely dry. Anti-rust oil usually needs to leave a layer of oil film adsorbed on the metal surface for anti-rust effect, including volatile anti-rust oil will not be completely volatile dry, more or less oil on the metal surface. This product belongs to the conventional volatile anti-rust oil, the oil film thickness is about 10-50 microns, after use, the metal can feel a little oil, suitable for most of the surface requirements are not high products. In addition, the anti-rust oil with thinner oil film and faster volatilization can hardly feel the oil after use. It is suitable for products with particularly high surface requirements. Please click on the product link:

Precautions for the use of cutting fluid and how to clean it?

Why does the cutting fluid produce foam when it is used? How to solve this problem? The main reason for the foam: the liquid level of the cutting fluid is too low, the flow rate of the cutting fluid is too fast, the bubbles have no time to overflow, and the accumulation is more and more, resulting in a large amount of foam; The right angle in the sink design is too much, or the nozzle angle of the cutting fluid is too straight. Methods to avoid foam: In the centralized cooling system, the pipelines are connected in series, and the pressure of the pipelines near the cooling tank should be lower to ensure that the liquid level of the cutting fluid is not too low, and the liquid level should be checked in time and added in time. Cutting fluid. At the same time, control the cutting fluid flow rate is not too fast. When designing the sink, pay attention to the right angle of the sink

Application of environmental protection industrial cleaning agent to automobile parts cleaning agent

With the rapid development of China's automobile industry, the market demand potential is huge. In the production and processing of auto parts, the maintenance and cleaning of metal parts is a very important link. With the development of industrial cleaning agents and the strengthening of people's awareness of environmental protection, people have put forward higher requirements for the use of cleaning agents and cleaning equipment. (I) environmental protection metal parts cleaning agent of the general requirements of the first cleaning equipment and cleaning parts will not be corroded, followed by the cleaning process will not produce residues, including insoluble matter, dirt and is not conducive to the subsequent processing of the coating. Next, the cleaning efficiency should be high, and the cleaning is enough

Do you know these secrets of metal cleaners?

Parts need to be surface treated before assembly and production. However, due to the aging of some machine tools and equipment, oil stains will be generated on the surface of the parts, which will leave an oil film and affect the binding force between the surface coating and the base metal, especially for the metal coating. Even a small amount of oil stains will lead to weak binding of the coating, resulting in peeling, bubbles and other phenomena. At the same time, the oil will infect the electrolyte, affecting the structure of the coating metal products in the machining process, storage process or polishing process will inevitably be contaminated with oil. Metal cleaning agent to choose a regular industrial cleaning agent.

Boost the development of China's industrial 4.0 cleaning agent

Machinery manufacturing technology is not only an important symbol to measure the level of scientific and technological development of a country, but also the focus of international scientific and technological competition. In order to improve the level of industrial manufacturing, Germany put forward the vision of industrial 4.0 and described the future development of the manufacturing industry; with the concept of industrial 4.0, China promulgated the "Made in China 2025" strategic plan to promote a new generation of machinery manufacturing industry. RuiSiBo followed the pace of industrial 4.0, developed a variety of industrial cleaning agents, suitable for machinery manufacturing industry, to help the further development of machinery manufacturing cleaning industry. To improve the level of mechanical manufacturing, mechanical manufacturing, mechanical testing and other requirements are more stringent. Especially the machine.