Cleaning agent manufacturers teach you how to clean die cast aluminum?

Die casting aluminum is a kind of aluminum alloy product casting process with high technical requirements and wide application. Die-cast aluminum products are of good quality, high precision, and smooth surface, and can usually be used directly after casting. Although die-cast aluminum can be used directly after casting, it must be a process in actual processing and production, that is, surface cleaning. After the processing of die-cast aluminum is completed, the surface will remain in the production of oil stains and other stains, these oil stains must be removed before use. Although it seems that only the surface of the oil, grinding oil and other residues cleaning, but this step is absolutely not sloppy, one is the surface of the residue

Aluminum cleaning agent in the case of lithium battery cleaning

With the development of science and technology, the state's strong support for new materials and new energy, and related industries for new energy are booming. Among many new energy types, lithium energy is particularly prominent. Everyone in life is inseparable from lithium batteries, such as mobile phones, laptops, tablets, and power banks that are held in their hands every day. Even lithium battery cars, such as the world-famous Tesla pure lithium car, have a power system composed of thousands of 18650 lithium batteries. With the wide application of lithium energy, consumers have higher and higher requirements for the quality of lithium batteries, which is more and more strict for enterprises producing lithium batteries and other accessories.

[aluminum cleaning agent] aluminum cleaning matters needing attention

Aluminum profiles in the production process, due to the need for molding, easy release, will use a variety of isolation additives. In the subsequent processing process, it is necessary to remove the release agent and grease attached to the surface.

The company won the 2018 Jiangxi province "send management into the enterprise" activity outstanding enterprise

Good news!! [Ruibao] won the 2019 annual Chinese industrial cleaning industry brand products-we have been climbing the Chinese industrial cleaning industry Everest!

2019

Won the weapons and equipment quality management system certification, through the ISO45001:2018 occupational health and safety management system certification

Application and requirements of environmental protection industrial cleaning agent in metal parts

(I) environmental protection metal parts cleaning agent of the general requirements of the first cleaning equipment and cleaning parts will not be corroded, followed by the cleaning process will not produce residues, including insoluble matter, dirt and is not conducive to the subsequent processing of the coating. Next is the cleaning efficiency is high, and the cleaning is thorough enough. Finally, low cost, in line with environmental protection requirements, harmless to the human body, the smell is relatively mild. In the metal processing industry, with the increasing demand for parts performance and processing efficiency, the cleaning agent is no longer a simple decontamination effect, but has been given more requirements. According to the characteristics of metal materials, it is required that the cleaning agent used not only can effectively decontaminate, but also needs to prevent rust on the surface of metal parts and enhance the corrosion resistance of products, which puts forward higher requirements for the additives added to the cleaning agent. Classification of (II) cleaning equipment and requirements for cleaning agents Currently commonly used metal cleaning equipment includes immersion cleaning equipment, spray cleaning equipment, high-pressure spray cleaning equipment and ultrasonic cleaning equipment. Intrusive cleaning is generally used for multi-cavity parts. This method has higher requirements for the cleaning ability of the cleaning agent and the ability to emulsify miscellaneous oil, but not for defoaming performance. However, a cleaning agent with a strong ability to emulsify miscellaneous oil has a disadvantage that the cleaning ability will gradually decrease, so the service life is short. When cleaning the parts in the automobile gearbox, most of the through spray cleaning method is used, and rinsing and drying are also carried out after cleaning. Spray cleaning equipment is generally equipped with skimmer, suitable for the use of anti-miscellaneous oil cleaning agent, but also consider the ability to defoaming. Cleaning agent has its own best use temperature range, its cleaning ability is increased with the increase of temperature, but once beyond this range, the cleaning ability will decline. Therefore, it is also important to master the appropriate cleaning temperature. High-pressure spray cleaning is mostly used to remove dirt on the surface of parts and components while also removing burrs on the metal surface. The parts are mostly positioned and sprayed at fixed points. The cleaning agent is required to have good foam resistance under high pressure. (III) the requirements of the subsequent processing process on the cleaning agent In some specific process conditions, the choice of cleaning agent must also consider the impact on the subsequent processing process. For example, in the production of transmission gear parts, there are two steps in the process of grinding teeth and shot blasting. After these two processes, the gear needs to be sprayed and cleaned. Then, in the middle between grinding and shot blasting cleaning, it is necessary to consider the use of the cleaning agent will not affect the subsequent shot blasting process, such as drying will not leave on the surface of the parts with viscous cleaning agent residue or cover film. These will destroy the quality of the shot peening process, resulting in product defects.

[ultrasonic cleaning agent factory] on the selection of ruisbo chemical, professional manufacturers!

The advantages of ultrasonic cleaning machine are: good ultrasonic cleaning effect and simple operation. The sound that people hear is a sound wave signal with a frequency of 20-20000Hz. Sound waves higher than 20000Hz are called ultrasonic waves. The transmission of sound waves propagates longitudinally in accordance with sinusoidal curves, producing a large number of small bubbles. One reason is that the local tensile stress in the liquid forms a negative pressure. The reduction of the pressure causes the gas dissolved in the liquid to be supersaturated and escape from the liquid to become small bubbles. Another reason is that the strong tensile stress "tears" the liquid into a cavity, which is called cavitation. The purpose of using the cleaning agent is to break the connection between the oil and the workpiece, so the simple use of water is not up to the effect of thorough cleaning. The main purpose of ultrasonic cavitation is also auxiliary ultrasonic cleaning agent for cleaning. The water-based ultrasonic cleaning agent contains a variety of ingredients to achieve the best cleaning effect, which can help reduce the surface tension of the liquid and thus increase the cavitation intensity. In addition, the ultrasonic cleaning liquid generally contains wetting agents or surfactants. For users, choose the appropriate cleaning fluid for the effective cleaning of the workpiece has a multiplier effect, the best choice of professional ultrasonic cleaning agent manufacturers to consult the purchase. jiangxi rui bo chemical limited company specializing in the production of industrial cleaning agent for the lord, specialized research and development for [ultrasonic cleaning agent], excellent quality, welcome to buy and consulting!