Application of metal cleaning agent in automobile manufacturing

       我国汽车产业迅猛发展，市场的需求发展潜力极大。在汽车零部件的生产制造生产过程中，机器设备金属材料零件的维护保养清洗是一个很重要的阶段。伴随着工业生产清洗技术性的发展趋势，及其大家环境保护意识的提升，大家对应用的清洗剂和清洗机器设备都明确提出了高些的规定。 （一）环境保护金属材料零部件清洗剂的一般规定        最先是对清洗机器设备和被清洗的零件不容易被浸蚀，次之是清洗全过程不容易造成残余物，包含不溶物、废弃物及其不利事后生产加工的土壤层等。下面是清洗高效率要高，而且清洗充足完全。最终还需要成本低，合乎生态环境保护规定，对身体没害，味道也需要相对性柔和。         在金属材质的激光切割加工领域，伴随着大家对零看不到特性和生产加工高效率的规定愈来愈高，清洗剂已不会再是单纯性的除污功效，只是被授予了大量的规定。依据金属复合材料的特点，规定所应用的清洗剂在能合理除污的与此同时，还必须对金属材料零部件表面具有防锈处理功效、提高商品的耐腐蚀能力等，这就对清洗剂中加上的改性剂明确提出了高些的规定。 （二）清洗机器设备的归类及对清洗剂的规定        现阶段常见的金属材料清洗机器设备包含浸入式清洗机器设备、自喷清洗机器设备、髙压自喷清洗机器设备和超音波清洗机器设备。 针对多内腔零件一般选用入侵式清洗，这类方法对清洗剂的清洗能力和乳状液杂油的能力有较高的规定，而对破乳特性则规定不高。可是，乳状液杂油能力强的清洗剂有一个缺陷，清洗能力会随着慢慢减少，因而使用期限较短。       在清洗汽车变速器中的零部件时大多数选用根据式自喷清洗方式，清洗以后还需要开展浸洗和烘干处理。自喷清洗机器设备一般都装有撇油器，合适选用抗杂油能力极强的清洗剂，此外还需要考虑到破乳能力。清洗剂都是有自身的最好应用温度范围，其清洗能力是随溫度上升而提升的，但一旦超过了这一范畴，清洗能力反倒会降低。因此 把握适合的清洗溫度也是很重要的。        髙压自喷清洗多用以除去零部件表面废弃物的与此同时还需要除去金属材料表面毛边，对零件多选用精准定位、指定自喷的方法，规定清洗剂在髙压下具备非常好的抵御泡沫塑料能力。 （三）事后生产加工工序对清洗剂的规定         在一些特殊的加工工艺标准下，挑选清洗剂的情况下还务必要考虑到对事后生产加工工序的危害。举例来说，在生产制造变速器传动齿轮零件的情况下，必须机械加工的工序含有磨齿和抛丸这二步。这两条工序完毕后都必须对传动齿轮开展自喷清洗。那麼，在磨齿和抛丸中间的正中间清洗时，就务必要考虑到所应用的清洗剂是否会对后边的抛丸工序导致危害，比如烘干处理后是否会在零件表面上留有具备黏性的清洗剂残余或遮盖膜等。这种都是会毁坏抛丸工序的生产加工品质，造成商品存有缺点。

How to deal with industrial wastewater of environmental cleaning agent

In industrial production, industrial cleaning agents are generally divided into two categories, one is environmentally friendly cleaning agents, and the other is non-environmentally friendly cleaning agents. We often have a lot of problems, can immediately discharge waste water of industrial cleaning agent? How to identify environmental protection industrial cleaning agent? Energy-saving industrial cleaning agent can immediately discharge it? In industrial production, industrial cleaning agents are mainly used in general, including mechanical equipment hardware configuration, electronic optical electronic devices, food medical equipment industry, etc., are the shadow of industrial cleaning agents. As everyone knows, in industrial production, the waste water caused by industrial production cleaning has always been a headache, because it has the defects that cannot be solved and the cost is relatively high. In recent years, with the continuous improvement of China's environmental protection regulations and control, "immediate discharge of waste water" has been established as a prohibition. Therefore, many processing plants are looking for an energy-saving industrial cleaning agent that can be discharged immediately. Can environmentally friendly cleaning agents be discharged immediately? Unfortunately, today's industrial cleaning agents can not be discharged immediately. In industrial production, the application of environmentally friendly cleaning agents have to solve the discharge of waste water. The relevant laws and regulations of our country are very strict on the environmental protection standards of industrial production wastewater. The environmental protection cleaning agent itself does not have heavy metals exceeding the standard and does not contain phosphorus. After cleaning the goods, in the industrial production cleaning wastewater, there are naturally residual oil stains and stains in the industrial production cleaning. This wastewater must be solved before it can be discharged. Whether it is a general industrial cleaning agent or an environmentally friendly cleaning agent, the waste water caused by industrial production cannot be discharged immediately. In general, in industrial production, environmental cleaning agent wastewater treatment will be much simpler. Industrial cleaning agents are commonly used for industrial production cleaning, such as cleaning optical lenses, various metal materials, workpieces and raw materials, plastic and plastic products, such as surface oil stains, polishing powder, grinding fluid, dust and other stains. After cleaning, in order to better meet the environmental protection standards of water bodies, the company should properly treat the wastewater after cleaning. However, due to the harm of cleaning process and cleaning materials, the composition of water-based cleaning agent wastewater is complicated. There are not only components of cleaning agents, but also oil stains, metal particles and various inorganic components. How should the wastewater after cleaning be treated? Solution: Select evaporation and concentration solution (cutting oil wastewater treatment equipment). The wastewater enters the ultra-low temperature vacuum evaporator and volatilizes under the ultra-low temperature standard of the vacuum pump. The water vapor is suspected to generate pure water during the whole process of vacuum packaging and is collected into the cold water storage tank. The remaining small amount of waste is entrusted to solve.

Discussion on Hydrocarbon Cleaning Agent of Environmental Cleaning Agent

Theoretically, the hydrocarbon cleaning agent refers to the residual organic solvents obtained from the distillation of petroleum, petroleum hydrocarbons, hydrocarbon systems, hydrocarbons, industrial grade motor gasoline, etc. Most of the hydrocarbon-based detergents currently used or sold on the market are not exquisite commodities for simple distillation of petroleum, but only positive and enantiomeric ethane with a distillation range of 140-190 degrees C. Generally, petroleum is made by crude distillation, hydrocracking, distillation tower and isomerization. And why do you say that hydrocarbon cleaning agent is an environmentally friendly cleaning agent, the key is the following three points: 1. Because hydrocarbon cleaning agent is a very pure special organic solvent, the key is composed of carbon and hydrogen, so it can be completely released at normal temperature and heating, without all residues. 2. After toxicology experiments, the inhalation toxicity, oral toxicity and skin touch toxicity of hydrocarbon cleaning agents are all slightly toxic and do not belong to carcinogens. Compared with benzene homologs, it is safer for cleaning actual operators. 3. Hydrocarbon cleaning agent can be dissolved of course, and the cleaning wastewater can be put into raw coal or fuel steam boiler for incineration treatment. The key reactants for incineration treatment are CO2 and water, and there is no environmental pollution to the gas. Hydrocarbon cleaning agent is not effective chlorine, the destruction index of active oxygen is zero. RuiSiBo New Material Co., Ltd. specializes in the production of high-end environmental protection industrial cleaning agent manufacturers, integrating R & D and production. Really solve the problem of cleaning customers.

Do you understand the three major misunderstandings of metal cleaning agents?

I told you that the three major metal material cleaning agents are misconceptions. In daily life, environmental protection cleaning agents have won the love of many customers. Environmental protection metal material cleaning agents are used as organic solvents for cleaning metal material parts and machinery equipment. Basically, every machinery and equipment factory will use these cleaning agents to carry out machinery and equipment maintenance. However, due to careless application, the actual cleaning effect is not idealized and the cleaning agents are consumed, increase the cost of cleaning. So, what is the proper operation method of metal material cleaning agent? What should I pay attention to when applying? 1. metal material cleaning agent can be immediately cleaned with the source liquid? The operation methods of different cleaning agents are different, and the application must be carried out in accordance with the product introduction or let the manufacturer give MSDS. Generally speaking, metal material cleaning agents are divided into two categories: water-based and solvent-based. Solvent type cleaning agent is generally composed of nitrogen compound organic solvent, can not be diluted with water. The water-based cleaning agent contains a certain amount of foam. If it is applied immediately without carrying out a certain proportion of dilution with water, it will cause too much foam. In addition, the water-based cleaning agent concentration value is relatively high, if immediately applied, will give people a very "oil" feel, the machine equipment, parts are not very good. 2. cleaning agent must be cleaned at room temperature? Solvent-based cleaning agent is the key to the nitrogen compound organic solvent chemical substances, containing an open flash point, can not carry out heating cleaning, so under normal conditions only in the normal temperature state of cleaning. However, the water-based cleaning agent can cooperate with the ultrasonic cleaning agent to carry out heating cleaning. Generally speaking, the actual cleaning effect of the water-based cleaning agent is the best when it is above and below 55°C. 3. simple cleaning on it? Many people think that the cleaning agent can be cleaned by spraying immediately. In fact, there are many ways to operate the cleaning agent for metal materials, and the cleaning should be distinguished according to the specific situation. For example, for the parts with thick surface stains and more carbon deposits, appropriate scraping and wiping shall be carried out first, and then heated and cleaned after soaking in the cleaning tank for a period of time to ensure the elimination of difficult-to-remove vegetable grease. When cleaning, high-precision parts should be cleaned first, and then general machinery and equipment parts should be cleaned to ensure that high-precision parts will not be damaged and everything can work normally. When cleaning the pipeline, use the working pressure gun or other special spouting tools to carry out pressure charging and flushing first. Wait for a while after a period of time, and then apply cleaning agent cleaning.

Classification and use of high-end industrial cleaning agents

Analytical chemistry or biopharmaceuticals used in industrial production to remove dirt are collectively referred to as industrial production cleaning agents. Industrial production parts often have grease or polishing paste that must be removed, or cleaning solder paste or oxidant on electronic devices or circuit boards in electromechanical installation engineering must be carried out with cleaning agents. There are many different types of industrial production cleaning agents. The following is a brief introduction to the operation steps of industrial production cleaning agents: Classification of 1. cleaning agents (1) The application field of organic solvent cleaning agent is cleaning and painting. (2) The application field of water-soluble cleaning agent is to clean the cutting fluid on the surface of cast iron parts (degreasing, dewaxing, anti-rust treatment solution). Selection method of 2. cleaning agent (1) the rate of cleaning dirt is faster and the scale is completely dissolved. The cleaning agent itself has a strong ability to reflect, disperse or dissolve and remove dirt, and can completely remove dirt in a relatively limited period of time. (2) The harm to the overall cleaning target should be within the permitted level, and there should be relative preventive measures against the corrosion that may be caused by metal composite materials. (3) The cleaning agent is an environmentally friendly ancestral recipe, which is not toxic to organisms and the environment. (4) Cleaning The entire process does not clean the overall target surface and leaves insoluble matter, which does not cause new stains. (5) Do not cause adverse effects on the entire process of cleaning and on-the-spot cleaning of plastic foam and odor. (6) The cleaning agent cannot be flammable, explosive, or have some kind of irreversibility to the mechanical equipment that needs to be cleaned. Operation steps of 3. cleaning agent (1) Cleaning agent at normal temperature or unpacking: the cleaning time shall be appropriately increased, and the cleaning frame shall be slowly shaken during cleaning to allow the cast iron parts to touch with the cleaning liquid. After cleaning, the cast iron parts shall be soaked with pure water/domestic water to be clean and tidy before blowing dry. (2) spray system: the cleaning agent in accordance with the provisions of the concentration value selected, and then the object to be cleaned into the spray system machine can be. (3) Hot soaking: heat up the cleaning agent with selected concentration value, soak it clean and tidy with pure water/domestic water after cleaning, and then blow dry. (4) Cleaning: Generally, the source liquid is used after the closed liquid is used, and the concentration value of the cleaning agent is relatively higher during cleaning. (5) ultrasonic cleaning: the source liquid closed liquid after pouring into the ultrasonic cleaning machine cleaning liquid circulation pipeline, can be used for multiple cycles. The above is a wide range of types and selection methods of industrial production cleaning agents. Reasonable selection of industrial production cleaning agents according to the type of mechanical equipment and the geographical environment of the production process can improve the service life of mechanical equipment. Ruisibo focuses on the research and development and production of industrial cleaning agents, production of high-end industrial cleaning agent manufacturers, cleaning agent products have excellent performance, environmental protection and good after-sales service. If you want to buy cleaning agents, you can consider trying Ruibao cleaning agents.

Shenzhen Railway Cleaning Agent Manufacturers

Shenzhen railway cleaning agent wholesale where there is As China's railway department, the Ministry of Railways is very strict with the choice of cleaning agent manufacturers. It is usually very strict to find cleaning agent wholesale. Whether the quality meets the standard, whether the product is green and environmentally friendly, and whether the cleaning agent formulation technology is qualified? Wait. In fact, many local Ministry of Railways cleaning agents wholesale in Ruisibo, because Ruibao cleaning agent is the main research and development unit of China's rail transit cleaning agent, cleaning agent in line with the Ministry of Railways cleaning agent standards. Among them, the Ministry of Railways in a certain area of Shenzhen purchased the high-efficiency cleaning agent for GRB-802 train air conditioning from Ruisibo. Resbo cleaning agent wholesale is different, look I have seen many series of track cleaning agents through Ruisibo's official website. Ruisibo has set up the first rail transit environmental protection cleaning agent engineering technology research center in China, and has carefully developed special high-efficiency cleaning agents for trains. GRB series has become the cleaning agents designated by the Ministry of Railways to purchase, so the wholesale of cleaning agents from the Ministry of Railways has come to Ruisibo. Let's take a look at the process and effect of aluminum fin cleaning agent for train locomotive air conditioning Processing Part Name: Locomotive Air Conditioning Aluminum Fin Material: Aluminum Applicable industry: railway locomotive maintenance Customer's current cleaning equipment, processes and processes: Spray gun cleaning Note: pay attention to control the cleaning fluid and cleaning surface contact time. The high-efficiency cleaning agent for GRB-802 train air conditioner is formulated by a variety of high-quality surfactants, strong penetrating agents, oil stain solubilizers, special protective agents for aluminum materials, brighteners, and deionized water. It is used for cleaning heavy oil pollution such as air-conditioning shell, air-conditioning wing, bogie, air pump radiator, motor shell, wheel hub, etc. of motor car, subway (including light rail) train and maglev train. ☆ The product can effectively remove aluminum and its alloy surface oxides and mildew spots while removing surface oil stains, making the aluminum surface smooth as new. ☆ The product contains strong penetrant and special oil stain solubilizer, which is especially suitable for rapid stripping and cleaning of heavy oil and grease on the surface of steel, aluminum and other metals at normal temperature. The operation process is simple, low foam, easy to rinse, no residue. ☆ The product is strongly alkaline, but contains a special metal corrosion inhibitor, which is safe to use and does not damage the material matrix. ☆ Product environmental protection, high efficiency, economy and safety.

Environmental cleaning agent selection of water based cleaning agent or solvent cleaning agent?

Cleaning agent in the field of cleaning agent commodities are generally divided into three categories: The first type of water-based cleaning agent The second category is semi-aqueous cleaning agent The third category is solvent cleaning agents. Industrial production cleaning agents are widely used in metal materials manufacturing, electrical and electronic, electronic optics, medical machinery and other fields. The two key types in the sales market are water-based and solvent-based. I will also give a brief and detailed introduction to these two types below. Water-based cleaning agent is very easy to understand, that is, water is used as a solvent, and the product itself belongs to water-soluble chemicals. The solvent type generally refers to the organic chemical solvent composed of organic matter as the solvent of the cleaning agent. From the theoretical definition of solvent, solvent-based cleaning agent is an experimental reagent that can dissolve other chemical substances. It can be called solvent, such as water, which can dissolve sugar and salt, but water cannot dissolve oil. At the moment, some organic matters can be guaranteed. It can dissolve oil immediately like water dissolves sugar. Therefore, in the cleaning industry, the solubility of different solvents for different dirt is different, and various cleaning agent commodities have been developed. But a good solvent-based cleaning agent must have the following standards: The organic chemical characteristics of stable, not easy to reflect with the cleaning material; ②Small interfacial tension and viscosity, strong permeability; ③ Low melting point, able to dry independently; No opening flash point, not flammable; The basic principle of water-based cleaning is mainly the chemical substances such as surfactants added to it to achieve the actual cleaning effect. The advantage of water-based cleaning agent is odorless and harmless, such as washing powder, which covers a wide range of cleaning. However, volatiles are not very good and need to be dry afterwards, which is not suitable for some special fields. The environmental protection solvent cleaning agent of RuiSiBo is relative to the water-based cleaning agent, which has the advantages of good removal power to water-soluble stains, stronger volatile matter, stable characteristics, in line with China's environmental protection regulations, non-etching materials, no stimulating taste, comprehensive low cost and so on. The basic principle of solvent-based cleaning is mainly the working ability of its organic matter itself. Naturally, if you want to achieve stronger practical effects and some environmental protection requirements, you need to add some additives. This kind of situation is related to the key secret recipe problem. In actual production and manufacturing, in addition to purposefully selecting solvent-based or water-based cleaning agents due to different cleaning oil stains, we will continue to make different selections due to different processing technology regulations. Since water-based cleaning agents are generally used for soaking and cleaning, there is also a whole process of soaking and drying treatment after cleaning. However, solvent cleaning agents are used for cleaning and processing because of their strong volatiles and volatilize immediately after wiping without soaking. For example, some optical lenses can be prevented from being printed by using such processing technologies. Solvent-based cleaning agents, water-based cleaning agents are good or bad, we in the case of selection according to their own commodity conditions and processing technology provisions to accurately distinguish, look forward to your assistance.

Water-based cleaning agent and oily cleaning agent which is environmentally friendly cleaning agent?

Nowadays, the industrial production cleaning agent currently on the market is divided into 2 minutes, one is a common oily cleaning agent, there is also a water-based cleaning agent. What is the difference between these two cleaning agents? Today, Ruibao Cleaning Agent Xiaobian will accompany you to learn about the difference between aqueous cleaning agent and oily cleaning agent. I look forward to the following professional knowledge to help everyone! The difference between water-based cleaning agent and oily cleaning agent: 1. The environmental cleaning agent is water-based, can dissolve with water at will, can clean oil stains on the metal surface, can be operated by ultrasonic wave and self-spraying mechanical equipment, and can choose phosphorus-free secret recipe according to customer regulations. With short-term anti-rust treatment effect. 2, oil cleaning agent can not add water application, its characteristics are evaporation fast, like ethanol, in addition to the oil stains can also remove latex. Cleaning the same product workpiece, water-based cleaning agent is better than oily cleaning agent. 3. Compared with oily cleaning agents, water-based cleaning agents are more energy-saving and environmentally friendly. Advantages of water-based cleaning agents: 1. High efficiency durability: The water-based cleaning agent is equipped with PH thickener, and the PH value can be basically kept unchanged according to long-term application. It can not only be based on the electrochemical corrosion condition caused by the decrease of PH value, but also has a long service life exceeding 30-60% of the traditional water-based metal material cleaning agent under the same dilution multiple condition. While saving the cost of liquid exchange, it can also reduce the time consumed for liquid exchange. 2. Cleaning strength: with reasonable page surfactant, olefin metathesis enters all small gaps that are difficult to clean, oil stains are quickly separated from cleaning, and dirt particles, carbon deposits, stains and vegetable oils are casually removed. Whether it is common mechanical lubricating oil, cutting fluid, rust inhibitor that is not easy to clean, and Rashin forming oil, it has excellent cleaning practical effect, and the surface of the product workpiece is not easy to produce residue under natural dryness, especially suitable for high precision cleaning applications. The above content is the difference between water-based cleaning agent and oil-based cleaning agent compiled by Ruibao cleaning agent. We look forward to helping everyone. Ruibao cleaning agent specializes in producing high-end industrial cleaning agent manufacturers. We hope our customers can come and inquire!