Engineering case

Successful Cases

Environmentally friendly hydrocarbon cleaning agent-the best choice to replace ODS solvents

Environmentally friendly hydrocarbon cleaning agent-the best choice to replace ODS solvents

As people's awareness of environmental protection began to increase and the "New Environmental Protection Law" officially began to be implemented, more and more people began to use hydrocarbon cleaning agents. However, there are still some people who think that there is no difference between hydrocarbon cleaning agent and traditional kerosene and trichloroethylene cleaning, and it will also have side effects on the human body. Some people even think that this is just a new "money fraud" product launched by the manufacturer. So what is hydrocarbon, why would someone advocate the use of hydrocarbon cleaning agent? In fact, hydrocarbon cleaning agent is a residual solvent obtained by distillation of crude oil with petroleum hydrocarbons, hydrocarbons, hydrocarbons, industrial gasoline and other titles. As the name suggests, hydrocarbon

More >>

[metal cleaning agent] the main cleaning process in metal processing

[metal cleaning agent] the main cleaning process in metal processing

Metal cleaning agent is widely used for cleaning high precision stainless steel, copper and other metal parts on the surface of the stamping oil, dirt and so on. And mechanical parts of the surface oil cleaning. Metal cleaning agent in the mechanical processing of the intermediate process, finishing and assembly process of cleaning, mainly using spray and shaking two kinds of cleaning methods. Spray cleaning also uses two kinds of water-soluble detergent and solvent. 1. Metal cleaning agent mechanical processing intermediate process cleaning process using water-soluble detergent when the conventional cleaning process, one is spray cleaning (alkali degreasing)-spray cleaning (water washing)-spray cleaning (anti-rust agent) blast-drying; Another

More >>

[metal cleaning agent] water-based metal cleaning agent present situation and development trend

[metal cleaning agent] water-based metal cleaning agent present situation and development trend

Metal cleaning is an essential process in the process of processing, assembly, storage and maintenance of metal parts. In the past widely used metal cleaning agent for a variety of solvents, alkaline or acidic water-based cleaning agent, at home and abroad issued a lot of regulations, limiting the use of most of the solvent, so the future development direction of metal cleaning agent should be water-based cleaning agent. 1. The current situation of water-based metal cleaning agents in China, the traditional cleaning process is still mainly used in gasoline, kerosene and other mixed hydrocarbons. In the 1960 s, strong alkaline substances (such as NaOH, Na2CO3, Na2SiO3, Na

More >>

How to choose a metal cleaner? Correct use of metal cleaners

How to choose a metal cleaner? Correct use of metal cleaners

In recent years, with the rapid development of high-tech industrial manufacturing, the related industrial cleaning agent market has also ushered in a larger market development space. More and more enterprises begin to choose environmental protection metal cleaning agent for metal equipment maintenance, then the choice of metal cleaning agent should pay attention to what problems? The choice of metal cleaning agent note: 1. the choice of water-based cleaning agent or solvent-based cleaning agent, if you want to use ultrasonic machine cleaning, you should choose water-based cleaning agent, if you want the solvent volatile fast, but also after a period of time with anti-rust function, you need to choose solvent cleaning agent. 2

More >>

Cleaning agent manufacturers teach you how to use metal cleaning agent

Cleaning agent manufacturers teach you how to use metal cleaning agent

In the industrial cleaning agent market, metal cleaning agent is used as a solvent for cleaning metal parts and equipment, and because environmental protection and harmlessness can successfully replace gasoline and kerosene, accounting for the majority of the market share, almost every machinery factory will use metal cleaning agent to maintain equipment, but due to careless use, the cleaning effect does not reach the ideal state, wasting the solution and increasing the cleaning cost. So, what is the correct way to use the metal cleaning agent? What should be paid attention to when using it? What is the correct way to use the 1. metal cleaning agent? 1. Water-based cleaning agent cleaning method (1)

More >>

Is paint remover harmful? What should be paid attention to when using?

Is paint remover harmful? What should be paid attention to when using?

To find out whether the paint remover is harmful to the human body, we must first understand its composition. Traditional paint strippers generally use methylene chloride, ketones, alcohols, esters and benzene as solvents, such as dichloromethane, etc., which are highly volatile, toxic, and have serious environmental pollution, and are harmful to the health of construction workers. Dichloromethane has an anesthetic effect on humans, mainly damaging the central nervous and respiratory systems; it has an irritating effect on the skin; exposure to very high concentrations may lead to loss of consciousness and death. Inhalation or skin contact of large amounts of benzene into the body by humans and animals can cause acute and chronic benzene poisoning. Studies have shown that benzene causes

More >>

Metal cleaning agent, steel cleaning agent with what brand of good?

Metal cleaning agent, steel cleaning agent with what brand of good?

Cleaning Process and Cleaning Method for Steel Water Pump and Pulley (Figure) Steel Cleaning Agent Manufacturers prefer Ruibao Steel. Due to material reasons, the required cleaning agent is high and cannot damage the steel material. This leads to many cleaning agent users and cleaning agent manufacturers failing to make a deal, and the response is given to Ruisibo Chemical. After in-depth research and production, Ruisibo Chemical's technical team can meet the needs of cleaning agent users. Iron and steel cleaning agent on the choice of low foam metal cleaning agent is mainly composed of high quality low foam surfactant, penetration diffusion agent, compound organic antirust additives, high quality special effects cleaning additives, deionized water and so on. Iron and steel cleaning agent real

More >>

What kind of metal rust remover is good? The scope of use of rust remover?

What kind of metal rust remover is good? The scope of use of rust remover?

Metal corrosion is widespread in the production and life, for metal corrosion need to use metal rust remover in time, in addition, the use of rust remover also need to do a good job of rust prevention, so understand the metal rust remover can help us save production costs, improve our production efficiency. Know yourself and know the enemy can not be defeated, come and have a look, here for you summed up a good variety of types of metal rust remover use method. There are generally nine kinds of metal rust, as long as the use of appropriate metal rust removal agent 1. general attack metal rust is also called uniform attack corrosion, general attack corrosion is the most common type of corrosion, it is through chemical

More >>

Cleaning principle of industrial cleaning agent

Cleaning principle of industrial cleaning agent

During industrial cleaning, the dirt is removed by the dissolution of chemical agents on the dirt surface. Its essence is that the industrial cleaning agent dissolves from the dirt surface in contact with it. At the same time, the cleaning agent penetrates into the dirt, reducing the binding force between the dirt particles and reducing the binding force between the dirt and the basic equipment, so that the dirt dissolves or the dirt loosely falls off and is removed. Chemical cleaning operation, its purpose is to remove pollution, improve quality and obtain good processing performance. The development of chemical cleaning technology is closely related to the progress of industrial cleaning agents. The combination of green chemistry and chemical cleaning concepts has recently been proposed, I .e., in reducing or

More >>

Have you found the main factors that affect metal rust?

Have you found the main factors that affect metal rust?

(I) the internal factors of metal corrosion from a thermodynamic point of view, compared with metal and its corrosion products, with high energy, is unstable, there is a tendency of spontaneous conversion to low energy corrosion products, that is, metal corrosion is a natural phenomenon. The vast majority of metals in the industry are multi-component alloys with different metallographic structures, impurities, uneven machining deformation, uneven stress distribution, etc. These physical, chemical and electrochemical inhomogeneities, when the surface encounters Corrosion media or the formation of a water film on the surface, chemical or electrochemical corrosion will inevitably occur. External factors that (II) metal corrosion 1. Phase

More >>

Look at today's high-speed rail on the composite material, cleaning agent is the key

Look at today's high-speed rail on the composite material, cleaning agent is the key

The export of China's high-speed rail is of great significance, because this is not only the "going out" of a single industry, but the "going out" of the entire industrial chain ". Although the current market scale of China's high-speed rail is small, once it is recognized by overseas markets, it will reshape the global brand image of made in China and drive the development of upstream and downstream segments of the industrial chain. For high-speed railways, the strength, fatigue performance, lightweight, and manufacturability of the materials used should have a higher level. Therefore, more and more new materials are used in this, and now they are generally in the following aspects: Composite car body Composites have begun to be applied to vehicles, and the amount is increasing.

More >>

Frequently asked questions: [volatile antirust oil] can do?

Frequently asked questions: [volatile antirust oil] can do?

[frequently asked questions: whether the volatile antirust oil can dry] can not be completely dry. Anti-rust oil usually needs to leave a layer of oil film adsorbed on the metal surface for anti-rust effect, including volatile anti-rust oil will not be completely volatile dry, more or less oil on the metal surface. This product belongs to the conventional volatile anti-rust oil, the oil film thickness is about 10-50 microns, after use, the metal can feel a little oil, suitable for most of the surface requirements are not high products. In addition, the anti-rust oil with thinner oil film and faster volatilization can hardly feel the oil after use. It is suitable for products with particularly high surface requirements. Please click on the product link:

More >>

< 1...161718...23 >